Product Information
Slant trucks are designed for a variety of uses, from cruising to carving to freeriding. The aluminum cast hangers are reversible for both 54 and 50 degree options. They come installed at 50 degrees for stability at high speeds, or flip 'em over to 54 degrees for tighter turns. They also come stock with a barrel + cone bushing combo. The barrel bushings provide stability while the cone allows for more maneuverability on your carves.
The 180mm Inverted 7.0" Features:
- Axle width: 9.75"
- Hanger width: 7.0"
- Reversible 50/54 degree hangers
- Flip the hanger over to 54 degrees for tighter turns
- Barrel + Cone bushing combo
NOTE: Sold only as a set of two (2) trucks.
Shop other Slant Reverse Kingpin Trucks from Warehouse Skateboards.
Help Guide
How to Buy Skateboard Trucks
What size skateboard trucks do you need?
Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard deck. When selecting skateboard trucks, the width of your truck axle should closely match the width of your skateboard deck. The truck size can be measured by the width of the hanger or the width of the axle. Every skateboard requires two trucks.
There are several parts that make up the skateboard trucks. The axle is the pin that runs through the trucks to which the wheels will attach. The hanger, usually made of metal, is the largest part of the skateboard truck that is somewhat triangular in shape. The axle runs through the hanger. The kingpin is the large bolt that holds these parts together and fits inside the skateboard bushings.
When purchasing, you will receive the two trucks necessary to assemble your skateboard. Skateboard trucks come in various sizes and colors, and Warehouse Skateboards carries a huge selection of brands to fit your personal preference.
6"-7.25" truck axle - 6.5" to 7.25" skateboard decks7.5" truck axle - 7.25 to 7.5" skateboard decks
7.75" truck axle - 7.5” to 8" skateboard decks
8.0" truck axle - 8” to 8.5" skateboard decks
8.5" truck axle - 8.5” to 9" skateboard decks
9.0" truck axle - 9” to 10” skateboard decks
10.0" truck axle - 10” and above skateboard decks
What truck profile height do I need?
Truck profile is the distance between the bottom of the skate deck and the hanger. In general, a mid-sized truck works well for most skateboarders, but high or low trucks may be preferred for different styles of skating.
LOW
Provides extra stability for flip tricks, designed for small wheels (50-53mm wheel size recommended)
MID
Good all-around profile for street or park (53-56mm wheel size recommended)
HIGH
Great for cruising and carving, designed for large wheels (56mm+ wheel size recommended)
Check out our massive selection of skateboard trucks.
If you still have questions about skateboard trucks, please visit our Skateboard Trucks Buying Guide.
You May Also Like
$49.99 Sale
$49.99 Sale